Pezzi di ricambio

CAFELAT

CAFELAT all E61 machines SILICONE GROUP GASKET - 8 MM

almenhaz CAFELAT SILICONE GROUP GASKET - 8 MM E61Fit for all E61 group head machine  rocket nota orchestrale Ecm profitec Price 30 AED

CAFELAT

CAFELAT SILICONE GROUP GASKET - 8.5 MM E61 and Decent

Details  Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone. Our own group gaskets made from food grade FDA silicone.  Unlike regular gaskets that are made from rubber these do not have any smell or taste whatsoever, and are easy to change since they will not bake rock hard like rubber does.    If you have ever struggled to change an old gasket you cannot help but notice the awful smell and the black soot that comes off the rubber.  And that is what you are potentially consuming with each drink. We have spent months testing and adjusting the material so that these have the same compression strength as rubber, but are also softer so that it is easier to create a good seal. Size for E61 8mm gasket: 73mm x 57mm x 8.5mm (Blue colour): SGS food test report We have found that the replica E61 groups made these days are pretty much all the same, the different machine manufacturers then use either an 8mm or an 8.5mm group gasket.   Also fits a Decent espresso machine.

CAFELAT

CAFELAT NUOVA SIMONELLI and Victoria Arduino SILICONE GROUP GASKET - 9 MM

For the Nuova Simonelli Aurelia and Aurelia II, as well as the Victoria Arduino Adonis and Black Eagle models. The Cafelat and "NS 1" side faces up when installing. 71 mm x 56.5 mm x 9 mm (Blue) conical

CAFELAT

CAFELAT SILICONE GROUP GASKET - 8.3 MM NUOVA SIMONELLI

CAFELAT SILICONE GROUP GASKET - 8.3 MM NUOVA SIMONELLI71 mm x 56.5 mm x 8.3 mm (Red) conical, for all of the older models of Nuova Simonelli, including the Program, Optima, Personal, Program VIP, Premier, Premier Maxi, Mac Digit, Mac Cup, Mac 2000, Oscar, Oscar II, Musica, Appia and Appia II.

Baratza

Baratza Silicone Gasket

Silicone Gasket fits between the hopper and the burr holder. Fits the Preciso, Virtuoso, Encore, Maestro Plus, and Maestro. PRODUCTS DESCRIPTION Baratza Silicone Gasket

CAFELAT

LA MARZOCCO KB90 GROUP HEAD GASKET AND ANTI-SHOCK CLIPS

Only fits the KB90 models of La Marzocco. Conical with a slight bevel on the bottom, 72 x 59 x 8 mm. The La Marzocco logo goes up when installing.

Made in Italy

OR 18,64X3,53 VITON®

OR 18,64X3,53 VITON®

Baratza

Baratza Burr Holder

Burr Holder for Preciso, Virtuoso, Encore, Baratza Maestro Plus, and Baratza Maestro. This holder does not fit the Solis Maestro or Solis Maestro Plus. PRODUCTS DESCRIPTION Baratza Burr Holder

Made in Italy

FDA ANTI-VACUUM VALVE ROD OR- OR 4,9X1,9 VITON®

FDA ANTI-VACUUM VALVE ROD OR- OR 4,9X1,9 VITON® Suitable to La Marzocco (Strada MP, GB5/FB80, Linea PB)

Made in Italy

ANTI VACUUM VALVE 1/4" CW510L

ANTI VACUUM VALVE 1/4" CW510L

Made in Italy

E61 GROUP HEAD JET - 6 X 0.75/0.8 MM

M6 x 0.75 mm, 0.8 mm orifice. One each per purchase. Used in the BFC, Brugnetti, ECM, Fiamma, Grimac, Royal and Sanremo group heads.

AeroPress

AeroPress Replacement Filter Cap

Replacement filter cap for Aerobie Aeropress coffee maker Same size, color, and material as the original part Guaranteed to fit Aerobie Aeropress BPA-Free Polypropylene Plastic PRODUCTS DESCRIPTION Aeropress Replacement part is the same size, color, and material as the original

IMS

IMS GAGGIA/SAECO COMPETITION SCREEN SHOWER

Made in ItalyExternal diameter 55mm, internal diameter M5.98 holes d.3mm, AISI 316   Fits:GaggiaCoffee, Classic Coffee, Carezza, all old and new Baby, Baby Class, New Baby, Gaggia Espresso, Tebe, and ParosGaggia - DECO, D90, E90, GD, GE, LCD, TS, XD, XE and SAECO AROMA.   Fits the following: Gaggia classic Pro - they have the new stainless steel shower holder Gaggia: E90, D90, TE-93/TD-93/XE/XD/ FD2000/FE2000 Gaggia: DECO, GD, GE, GE-GD, LC/D, TS,   Not compatible:  GRAN GAGGIA, PRESTIGE, STYLE, DE LUX Cubika Carezza Viva, Achielle G105, or G106 Gaggia Classic pre 2015 - you will need IMS kit or IMS shower holder below. (The pro has an indent preventing the IMS shower from sitting flat) Gaggia classic V2 with non removable shower screen holder and steel boiler 

IMS

IMS CIMBALI COMPETITION SCREEN SHOWER

Made in Italy. Suitable to: Cimbali, Faema E91, Astoria, BFC, Brasilia, Carimali, Elektra, Facino, Sanremo, etc.

ALMENHAZ COFFEE SUPPLIES L.L.C

Baratza m2 cone burr(50/50)(virtuoso, preciso

Ims

RANCILIO COMPETITION SHOWER

IMS code RA200IMMade in Italy. Suitable for Bezzera, Rancilio, Magister, Promac   IMS Competition shower screenFits: Rancilio Promac and LaPavoni , Magister, Bezzera Made in Italy Fits:Rancilio: AUDREY, BETSY, NANCY, SILVIA, CLASSE 6,7,8,9,10,11, EPOCA, FANTASY,MILLENIUM, Promac :Magister:La Pavoni:   BAR, CAFE, HOTEL, PUBBezzera: BZ02, BZ07, BZ09, BZ10, BZ13, BZ35, BZ40,​​​​​​​Galatea, Ellisse,Ebbis, B2000, B2006, B2009, B2013, B4000, B6000

IMS

IMS CONTI SACOME COMPETITION SCREEN SHOWER

IMS code CO200IMMade in Italy. Suitable to: Conti Sacome.External diameter 58,4mm, internal diameter 56,4mm, thk 9,65mm, hole diameter 6mm

Made in Italy

WALNUT GROUP HANDLE WITH METALLIC INSERT M8 D.28X46MM

Made in Italy. Suitable to: Astoria, Bezzera, ECM-Rocket, Grimac, Gruppo Izzo, La Marzocco, Orchestrale, La Pavoni, La Scala Symphony, Sanremo, SV Sab Italia, Vibiemme, Wega. *DON'T DIP IN WATER*

Rhino

Rhino Pitcher Rinser Valve Service Gasket Kit - Spinjet

Details The Rhino Spinjet Valve Service Gasket Kit has been designed for routine maintenance and gasket replacement on the Rhino Coffee Gear Spinjet Rinser and Valve Set. Inclusions: - 1 x Spring- 1x Piston Gasket- 3 x Mechanism O-rings Please note: This gasket kit is suitable for replacing gaskets in the RHPR600-S, RHSPINSET, RHPR300-S, RHPR150-S. Not suitable for the RHPR600.

Rhino

Rhino Pitcher Rinser Actuator Star - 123mm

Details Rhino Actuator Star is a replacement actuator star for all Rhino Pitcher Rinsers. To upgrade an existing rinser to the RHPRSTAR123, you will need to utilise the RHSPINSET Rhino Spinjet and Actuator Star Update Kit. This kit can be used to upgrade most pitcher rinsers on the market.Specifications: - Diameter: 123mm- Material: Stainless Steel

Made in Italy

MINIMO PORTAFILTER GASKET E61 74,1X58,1XH.8,3MM EPDM 80SH + PTFE FDA

Innovative portafilter gasket usefull for all the E61 compatible grouphead. Avoid the wrists stress reducing the friction of the portafilter on the grouphead.Suitable for FAEMA (mod. Carisma A/S, Compact, Due, E61, E61 Jubile, E61 Legend, E64, E66, E71, E71 GTI, E91, E92, E97, E98, Elite, Emblema A/S, Emblema Restyling A/S, Enova, Express, P4, P6, Smart, Smart A/S Restyling, Teorema A/S), Casadio (mod. Dafne, Dieci, Dodici, Quindici, Undici), Brasilia B61, VBM, Bfc Royal, Sab/Sv Italia, Wega, Expobar and other coffee machines.

Made in Italy

BREVILLE COMPETITION SCREEN SHOWER

IMS code BV200IMMade in Italy. Suitable to Breville, SageExternal diameter 53mm, internal diameter 52mm, thk 9mm, hole diameter 7,2mm

Made in Italy

FAEMA E61 NET SHOWER MOD. DRY COFFEE - CAULKED NANOTECH

Made in Italy. Suitable to particularly wet coffee.The nanotech treatment is an anti-adhesion treatment that increase resistance to corrosion; suitable for contact food.Nanotech is an universal coating for all materials certified for food contact according to NSF-51 and MOCA 1935/04. ISO 10993-5: 2009 non-cytotoxic certificate. Not suitable for new groups mod.Cimbali, Faema Emblema - Enova e Teorema

Orchestrale

MONOFASE SOLID STATE RELAY

Orchestrale

MICRO A ROTELLA 90° MICRO 90'

La Marzocco

LM Boiler 1G Strada

MAHLKONIG

HOPPER 0.5KG FOR K30 / EK43 (703754)

BWT

BESTMIN W.PREFILTRATION (BWTBCMINPF) (Bestmin MCartridge, Bestaste 10 Cartridge, Besthead Flex Duplex & Protector Mini Set)

BESTMIN W.PREFILTRATION (BWTBCMINPF) (Bestmin MCartridge, Bestaste 10 Cartridge,Besthead Flex Duplex & Protector Mini Set)

Rhino

Rhino Knock Chute - Replacement Rubber Sleeve

Durable and touch replacement Rubber Sleeve to suit the in-bench Rhino Coffee Gear Square Knock Chute. Perfect for all commercial environments. 

CAFELAT

CAFELAT SILICONE LEVER PISTON GASKET

49.5 mm x 40.5 mm x 7.5 mm. Silicone lubricant is highlyrecommended. Suitable for the current lever groups on the market: they are used by Astoria, Brasilia, Bosco, Kees VDW, Londinium, Quickmill et al.. Each piston requires 3 V seals. The V seals are much softer and easier to install than the rubber ones. Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.

flair

Flow-Control 2 Spout Kit (3 Spouts)

Weight .04 lbs Dimensions 7.25 × 12 × .5 in

flair

FLAIR 58 PREHEAT CONTROLLER WITH ELBOW CONNECTOR

flair

FLAIR 58 POER SUPPLY COMPLETE

flair

NEO Flex Release Valve (2 Pack)

Buy a replacement pack of NEO Flex Release Valves for the bottom of your piston. Not compatible with any other Flair product. Maybe you’ve damaged a release valve while learning to dial-in your NEO Flex. Or maybe you’ve just misplaced your backup and want to make sure you’re covered. No matter the reason, we’ve got your solution. Buy this replacement pack of two NEO Flex Release Valves and brew easy! Weight .01 lbs Dimensions 12 × 7.5 × .5 in

Rhino

RHINO PITCHER TERRY RINSER VALVE &SPIN JET

Rhino Coffee Gear Spinjet Spray Assembly with Actuator Plate has a new Spinjet Valve which sprays and spins at the same time to create a more effective cleaning action. This new design is ideal for plungers, pitchers, and other vessels which are often difficult to clean. This set is a suitable upgrade for most spray mechanisms and pitcher rinser spray assemblies. Specifications: Connection: External 1/2" thread. Recommended install parts CI321214S and CI221212W. Cold water use only NSF certified Please note: If you are retro-fitting the Rhino Coffe Gear Spray Assembly to a current rinser with drain tray, we recommend seating the Actuator Plate under the drain tray to ensure that the full and correct action can be achieved when depressed.

Rhino

Rhino Pitcher Rinser Square - 150mm - Spinjet.

The Rhino Coffee Gear RHPR150-S has been designed to fit in the bench of cafes, coffee bars, and other hospitality environments. This vessel rinser features a new actuator star design and a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 150mm in length, the RHPR150-S is the most compact pitcher rinser in the Rhino range and is the perfect option for smaller cafes and coffee bars.Features: The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for plungers using tea leaves, stubborn coffee grounds, and milk and other residues that can often be difficult to clean.  Compact design is perfect for smaller bench spaces. Easy installation. Actuator Star design helps to prevent the build-up of milk residue and is easy to clean. 304 Stainless Steel construction. No sharp edges; corners are rounded for safety. NSF Certified Specifications: Dimensions: 175mm (W) x 159mm (L) x 62mm (D) approx.(Depth with fittings: 110mm) Materials: Stainless Steel Drain Hose: 25mm/1" size (not included) Flow Rate: 120 lph approx. NSF certified Standard Inclusions: 1 x Sink 1 x Spinjet Spray Mechanism with Actuator Star 1 x John Guest Hose Adapter 1 x Drain Outlet

Rhino

Rhino Waste Tube Replacement Rubber Bar

Replacement Rubber Bar for the RHWTBK Rhino Waste Tube  Specifications:  Length: 155mm Thickness: 10mm Suits the Rhino Coffee Gear Waste Tube Part #: RHWTBK  Handwash Only

ALMENHAZ COFFEE SUPPLIES L.L.C

LAMARZOCCO O RING - H1024

Slayer

Slayer / LA MARZOCCO 6/8MM CONICAL GROUP HEAD PORTAFILTER GASKET

This gasket fits slayer and La Marzocco GS-2, GS-3, Linea, FB-70, GB-5 and FB-80. The thinnest version with a bevel, used on newer machines with no wear to moderate wear on the groups and portafilters. The "6" refers to the thickness on the outside diameter, the flat portion, and "8" refers to the thickness on the inside diameter, up to the peak of the cone shape. Installed correctly, with the cone sloped side facing down, the beveled edge of the cone shape adds an additional surface for a portafilter basket to seal against. La Marzocco old part #L105/B8, new part #H.3.001. Cross-references:   Part number Manufacturer MZ.203 ASCASO 1186760 LF L105/B8 MARZOCCO H.3.001 MARZOCCO 46000-56091 SLAYER ESPRESSO

La Marzocco

La Marzocco Diffuser Shower Screen Screw M6

La Marzocco Diffuser ScrewDiffuser Screw, stainless steel Linea-FB70,GB5-FB8038 AED

Made in Italy

E61 BREWING GROUP GICLEUR 0,6 MM

M6 x 0.75 mm, 0.8 mm orifice. One each per purchase. Used in the BFC, Brugnetti, ECM, Fiamma, Grimac, Royal and Sanremo group heads.

La Marzocco

LA MARZOCCO GIGGLER 0.8MM

"Gicleur .8MM, 400ml/30sec", part #E.5.100. Size of restrictor by model: Model Variation Flow Restrictor Size Part Number Linea Classic EE .8mm L087/GI8 Linea Classic AV .8mm (after Jan09) None prior L087/GI8 Linea Classic MP .6mm F.2.003 GB/5 All prior to SN 2075 .6mm L087/GI6 GB/5 SN 2075 to SN 5678 .6mm F.2.003 GB/5 SN 5679 to current .6mm F.3.032 Strada MP, EE .6mm F.2.003 Strada EP

Espresso parts

LA MARZOCCO GIGLEUR 0.6MM

Gicleur .6MM, 250ml/30sec" Size of restrictor by model: Model Variation Flow Restrictor Size Part Number Linea Classic EE .8mm L087/GI8 Linea Classic AV .8mm (after Jan09) None prior L087/GI8 Linea Classic MP .6mm F.2.003 GB/5 All prior to SN 2075 .6mm L087/GI6 GB/5 SN 2075 to SN 5678 .6mm F.2.003 GB/5 SN 5679 to current .6mm F.3.032 Strada MP, EE .6mm F.2.003 Strada EP

Made in Italy

LA MARZOCCO HEATING ELEMENT 800W 230V FOR COFFEE BOILER, TRIANGULAR FLANGE

LA MARZOCCO HEATING ELEMENT 800W 230V FOR COFFEE BOILER, TRIANGULAR FLANGE 2 poles, with nuts

Made in Italy

DIGITAL THERMOMETER FOR E61 GRP -50/+300°C -58/+572°F

Suitable for all machines that use an E61 type brewing group.LCD dissplay, s.steel sensor, plastic body, battery included.Total length 61mm, diameter 37mm.

Made in Italy

BREVILLE 2 CUPS 16/18G. H.28 COMPETITION FILTER IMS

IMS code B6252TH28EEdge d.62,5mm, body d.54mm suitable to tamper d.53/53,4mm, height 28mm, ridgeless. Perfored area d.44mm, holes d.0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Breville, Sage, Solis.

La Marzocco

LM. E. 1.001.MP •BRAINSTRADA MP

ALMENHAZ COFFEE SUPPLIES L.L.C

PRESS GAUGE 0-3 WITH CAPILLARY