Cafelat

CAFELAT

CAFELAT SILICONE GROUP GASKET - 8.5 MM E61 and Decent

Details  Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone. Our own group gaskets made from food grade FDA silicone.  Unlike regular gaskets that are made from rubber these do not have any smell or taste whatsoever, and are easy to change since they will not bake rock hard like rubber does.    If you have ever struggled to change an old gasket you cannot help but notice the awful smell and the black soot that comes off the rubber.  And that is what you are potentially consuming with each drink. We have spent months testing and adjusting the material so that these have the same compression strength as rubber, but are also softer so that it is easier to create a good seal. Size for E61 8mm gasket: 73mm x 57mm x 8.5mm (Blue colour): SGS food test report We have found that the replica E61 groups made these days are pretty much all the same, the different machine manufacturers then use either an 8mm or an 8.5mm group gasket.   Also fits a Decent espresso machine.

CAFELAT

CAFELAT all E61 machines SILICONE GROUP GASKET - 8 MM

almenhaz CAFELAT SILICONE GROUP GASKET - 8 MM E61Fit for all E61 group head machine  rocket nota orchestrale Ecm profitec Price 30 AED

CAFELAT

CAFELAT NUOVA SIMONELLI and Victoria Arduino SILICONE GROUP GASKET - 9 MM

For the Nuova Simonelli Aurelia and Aurelia II, as well as the Victoria Arduino Adonis and Black Eagle models. The Cafelat and "NS 1" side faces up when installing. 71 mm x 56.5 mm x 9 mm (Blue) conical

CAFELAT

CAFELAT SILICONE GROUP GASKET - 8.3 MM NUOVA SIMONELLI

CAFELAT SILICONE GROUP GASKET - 8.3 MM NUOVA SIMONELLI71 mm x 56.5 mm x 8.3 mm (Red) conical, for all of the older models of Nuova Simonelli, including the Program, Optima, Personal, Program VIP, Premier, Premier Maxi, Mac Digit, Mac Cup, Mac 2000, Oscar, Oscar II, Musica, Appia and Appia II.

CAFELAT

CAFELAT SILICONE LEVER PISTON GASKET

49.5 mm x 40.5 mm x 7.5 mm. Silicone lubricant is highlyrecommended. Suitable for the current lever groups on the market: they are used by Astoria, Brasilia, Bosco, Kees VDW, Londinium, Quickmill et al.. Each piston requires 3 V seals. The V seals are much softer and easier to install than the rubber ones. Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.